Glove Box Isolators by Labconco

Labconco glove box systems are ideal for precise atmosphere control and containment of hazardous materials. Labconco glove box configurations include ISO Class 5 HEPA filtration and leak-tight construction to meet stringent standards for protection from hazardous airborne particulates and powders.

Labconco's Protector Glove Box Systems provide top of the line protection. They consist of vented filtered glove boxes, controlled atmosphere glove boxes and combination vented/controlled atmosphere glove boxes. The leak-tight environment is ideal for contamination-sensitive materials under vacuum or in an inert environment.

Labconco’s Precise Glove Boxes offer an economical alternative to the Protector Glove Box line. They feature seamless, one-piece molded polyethylene shells that are chemical resistant and easy to clean. Precise Glovebox systems are also available in controlled atmosphere and HEPA-filtered configurations.

Browse our wide selection of Labconco glove boxes online. Call, email, or chat with a live product specialist to request a free quote or discuss configurations and custom solutions.

We can't find products matching the selection.

Controlled Atmosphere Glove Boxes by Labconco

Print Copy Copied

Labconco Combination Glove Boxes – Controlled Atmosphere and Filtered

Protector Combination Glove Boxes merges the features of filtered and controlled atmosphere models into one unit. Closure of two internal valves converts the box to a controlled atmosphere glove box that can be pressurized up to ±5 inches of water gauge for a leak-tight inert atmosphere. When atmosphere-sensitive procedures are complete, opening the two internal valves allows air from inside the box to pass through a HEPA outlet filter and optional second HEPA or Carbon outlet filter before exhausting via a ductwork to the outside. The physical barrier and filtration system protect users from exposure to hazardous materials and contamination-sensitive materials from degradation.

Additional Features of Protector Combination Isolation Glove Boxes

Automatic control of main chamber pressure, main chamber evacuation and filling cycles and transfer chamber evacuation and filling cycles
Factory-leak tested with a mass spectrometer while pressurized with Helium at 5 inches of water gauge
Detectable leaks: No greater than 1 x 10-6 ml/sec
LCD display provides real time monitoring of volume dilution rates in cubic feet per minute (CFM), air changes/minute (ACM), main chamber pressure (inches of water), and transfer chamber in inches of mercury and mBar
Interior right-hand side wall-mounted electrical receptacle with 10 amp maximum (100/115 volt models) or 10 amp maximum (230 volt models) circuit load
Two 8” ID, epoxy-coated aluminum double-grooved glove ports mounted 17” apart, with neoprene gaskets
RS-232 port, gas/liquid port, or port for oxygen or moisture monitor
Two 25-watt fluorescent lights

Features of Protector Filtered Glove Boxes

Airborne particulate cleanliness (measured under positive and negative pressures per ISO 14644-1 test method) exceeds ISO Class 5 conditions and achieves ISO Class 4 conditions
Inlet and outlet HEPA filters, 99.99% efficient on 0.3 micron particulates, rated for 70 CFM at <0.90" static pressure
Particulate containment: <20 nanograms per cubic meter as confirmed by SafeBridge Consultants, incorporated
Test port: HEPA or ULPA filter integrity
Safe filter removal and replacement with true bag-in/bag-out filter disposal system
Built-in blower speed control: from 15 CFM to 85 CFM depending on voltage and frequency
Clean up time: 0.05 ppm average tracer gas levels or less detected during perimeter scan testing (surpasses ASHRAE 110 standards) after 5 minute dilution
Inlet and outlet particulate (HEPA or ULPA) filters provides a leak-tight environment preventing contaminants from entering or exiting chamber
One-piece molded fiberglass liner
Clear acrylic inner and outer transfer chamber doors

Features of Protector Controlled Atmosphere Glove Boxes

Exceeds Class 1 atmosphere containment conditions for oxygen permeation less than 1.67 ppm/min per ISO 10648-2 test method
Oxygen permeation: <0.3 ppm/min (fiberglass-lined models) and <0.15 ppm/min (stainless steel-lined models) per ISO 10648-2
Input/Output port for optional AtmosPure Re-Gen Gas Purifier
Four manual valves with 3/8” compression fittings (two on main chamber and two on transfer chamber for evacuating, filling and added control
Main chamber pressure: automatic control (-5 to +5 inches of water gauge)
Main chamber evacuation and filling cycles: up to 499 cycles
Evacuation and filling cycles of transfer chamber evacuation: up to 199 cycles
Vacuum/pressure regulation: between -5 and +5 inches of water gauge in the main chamber and between 0 and -29.5 inches of mercury in the transfer chamber
Alarms: mutable and audible (when pressure/vacuum level is outside set limits
Three-position foot pedal: increasing gas/fill, off, evacuate/decrease gas
Factory-installed, rear-mounted, low profile stainless steel pressure relief bubbler at ±6 inches of water gauge
Two rear-mounted inlet and outlet 3/4” OD compression fittings for easy connection to optional AtmosPure™ Re-Gen Gas Purifier or other accessory drying train

Fiberglass and Stainless Steel Models

The fiberglass-lined models feature a one-piece molded fiberglass liner with clear acrylic inner and outer transfer chamber doors. This model has been performance tested to maintain oxygen levels as low as 0.4 ppm and moisture levels as low as 2 ppm. The oxygen permeation is less than 0.3 ppm/min per ISO 10648-2 and illumination exceeds 120 footcandles.

The stainless steel-lined models feature a Type 304 stainless steel liner with Type 304 stainless steel inner and outer transfer chamber doors. Type 304 stainless steel material also comprises the front panel. This model has been performance tested to maintain oxygen levels as low as 0.2 ppm and moisture levels as low as 1 ppm. The oxygen permeation is less than 0.16 ppm/min per ISO 10648-2 and illumination exceeds 80 footcandles.

AtmosPure Re-Gen Gas Purifier

This gas purifier maintains ultrapure inert atmosphere within the Protector® Controlled Atmosphere Glove Boxes. It has the capacity to remove 5 liters of oxygen gas (13,500 ppm) and 660 grams of moisture (water vapor) which is equivalent to 18 million ppm. The regeneration is, in turn, completed in 13 hours. Additionally, the leak rate is ± 0.000001 mL/sec.

Labconco Controlled Atmosphere Glovebox

The Protector Controlled Atmosphere Glove Box maintains an inert atmosphere to protect moisture and oxygen-sensitive materials; shown with fiberglass lining (stainless steel available) and optional base stand.

Labconco Precise Series Controlled Atmosphere Glove Boxes

The Precise Series Controlled Atmosphere Glove Box provides a draft-free environment with a physical barrier to protect sensitive samples against moisture and oxygen; includes a laminated safety glass window and powder-coated steel frame.

Labconco Protector Filtered Glove Box

Provides HEPA filtration and a physical barrier to protect the user against dangerous materials; offered with one-piece fiberglass or stainless steel lining, in single or double operator configurations (shown with fiberglass lining and optional stand).

Labconco Protector Combination Glove Boxes

Fiberglass or stainless steel Protector Combination Glove Boxes for use with hazardous or contamination-sensitive materials; shown with optional Mobile Base Stand.

Labconco Precise Basic Glove Box

Economical Precise Basic Glove boxes creates a draft-free environment with chemical-resistant polyethylene inner shell and safety glass window that produce a low leak rate; inner/outer transfer doors pivot upward for easy parts transfer. The Precise Basic Glove Box protects sensitive materials from oxygen and moisture contamination and meets Class 1 atmosphere containment conditions for oxygen leak rates (order stand and gas controls separately).

Labconco Precise Series HEPA Filtered Glove Boxes

Leak tight barrier mainains ISO conditions to protect the internal environment against contaminants and the operator against hazardous samples; includes a laminates safety glass viewing window and powder-coated steel housing

Labconco Precise Xpert Weigh Glove Box

Labconco Precise Series Xpert Weigh Glove Box provides a leak-tight barrier to protect sample and operator during fine-powder weighing; includes inlet and outlet HEPA filters (shown with optional stand).

Glove Box Isolators by Labconco

Protector Filtered Glove Box by Labconco
Labconco Controlled Atmosphere Glovebox
Labconco Precise Series Controlled Atmosphere Glove Boxes
Labconco Stainless Steel Protector Filtered Glove Boxes
Labconco Protector Filtered Glove Box
Labconco Protector Stainless Steel Double Filtered Glove Box
Protector Filtered Barrier Isolator Glove Box with HEPA Filter
Labconco Protector Combination Glove Boxes
Labconco Precise Basic Glove Box

Protector Filtered Glove Boxes provide inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to poten Protector Filtered Glove Box by Labconco Video outlining the features and benefits of Labconco's Protector Filtered Glove Boxes. Protector Filtered Glove Boxes provide inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials. These glove boxes feature particulate containment under 20 nanograms per cubic meter as confirmed by Safebridge Consultants, Incorporated and also meet ISO Class 3 standards.

Protector Controlled Atmosphere Glove Box shown with fiberglass lining and optional base stand | 3644-05 displayed Labconco Controlled Atmosphere Glovebox The Protector Controlled Atmosphere Glove Box maintains an inert atmosphere to protect moisture and oxygen-sensitive materials; shown with fiberglass lining (stainless steel available) and optional base stand.

Labconco Precise Controlled Atmosphere Glove Boxes protect sensitive materials against moisture and oxygen (shown with optional stand) | 3644-43 displayed Labconco Precise Series Controlled Atmosphere Glove Boxes Labconco Precise Series Controlled Atmosphere Glove Boxes provide a draft-free environment with a physical barrier to protect sensitive materials against moisture and oxygen; includes a laminated safety glass window and powder-coated steel frame.

Labconco Protector Filtered Glove Box with stainless steel lining, shown with optional stand | 3644-01 displayed Labconco Stainless Steel Protector Filtered Glove Boxes Provides HEPA filtration and a physical barrier to protect the user from exposure to dangerous materials; offered with one-piece fiberglass or stainless steel lining, in single or double operator configurations (stainless steel model shown with optional stand).

Labconco Protector filtered glove box shown shown with optional base stand | 3644-00 displayed Labconco Protector Filtered Glove Box Provides HEPA filtration and a physical barrier to protect the user against dangerous materials; offered with one-piece fiberglass or stainless steel lining, in single or double operator configurations (shown with fiberglass lining and optional stand).

Protector Stainless Steel Double Filtered Glove Box features four glove ports and requires two Labconco base stands | 3644-02 displayed Labconco Protector Stainless Steel Double Filtered Glove Box Provides HEPA filtration and a physical barrier to protect the user against dangerous materials; offered with one-piece fiberglass or stainless steel lining, in single or double operator configurations (shown with steel lining and optional stands).

Protector Filtered Barrier Containment Glove Boxes include inlet and outlet HEPA filtration to protect sensitive samples from contaminants, and operators from p | 3644-01 displayed Protector Filtered Barrier Isolator Glove Box with HEPA Filter Protector Filtered Barrier Containment Glove Boxes include inlet and outlet 99.99% efficient HEPA filtration to protect sensitive samples from contaminants, and operators from potential bio-hazards inside the enclosure.

Fiberglass or stainless steel Protector Combination Glove Boxes for use with hazardous or contamination-sensitive materials (shown with optional stand) | 3644-15 displayed Labconco Protector Combination Glove Boxes Fiberglass or stainless steel Protector Combination Glove Boxes for use with hazardous or contamination-sensitive materials; shown with fiberglass lining and optional Mobile Base Stand.

Labconco Economical Precise Basic Glove Boxes provide a draft-free moisture barrier for work with sensitive materials, shown with optional stand | 3644-40 displayed Labconco Precise Basic Glove Box Economical Precise Basic Glove boxes creates a draft-free environment with chemical-resistant polyethylene inner shell and safety glass window that produce a low leak rate; inner/outer transfer doors pivot upward for easy parts transfer. The Precise Basic Glove Box protects sensitive materials from oxygen and moisture contamination and meets Class 1 atmosphere containment conditions for oxygen leak rates (order stand and gas controls separately).

Technical Resources

Terra Universal Gloveboxes vol 3 #19

This mini-catalog features Terra's complete line of gloveboxes, including options for filtered isolation, containment, light-use (economical), temperature-control, nitrogen-purged and negative-pressure (vacuum), as well as customization options.