Gallery

Gun; Ionizing Blow-Off with 120VAC Power Supply & 0.4m Inline Filter

Ionizing Bar with 8 Emitters

Ionizing Bar with 8 Emitters

Ionizing Bar with 4 Distribution Fans

Ionizing Bar with 4 Distribution Fans

Ionizing Bar, IonBar, 11" w/2 emitters, installed with one distribution fan, 120V

Ionizing Bar; 44" w/8emitters, uninstalled

Static-Neutralizing Blow-Off Gun

This Ionizing Blow-Off Gun neutralizes statuc surface charges to protect sensitive parts from electrostatic discharge (ESD); a controlled burst of clean air or nitrogen then removes particles.

Ionizing Bar; 11" w/2 emitters, uninstalled

Ionizing Bar; 22" w/4 emitters, uninstalled

Ionizing Bar, IonBar, 22" w/4 emitters, installed with two distribution fans, 120V

Ionizer, 14.1", Static-Sensing

Ionizing Bar, 33"L, with Installation Kit, for 24 x 36 Fan/Filter Unit

Ionizing Bar, IonBar™, 33" w/6 emitters, installed with three distribution fans

Ionizing Bar; 22"L, with Installation Kit, for 24 x 24 Fan/Filter Unit

Ionizing bar, mounted to Fan/Filter Unit, provides a balanced stream of ions to the work area below to neutralize static charge and prevent electro-static discharge; 22" bar shown installed on 2' x 2' FFU.

Ionizing Bar; 33" w/6 emitters, uninstalled

Ionizing Module, for Adjust-A-Shelf Desiccator with 2 chambers

Static-Sensing Ionizer

The Static-Sensing Ionizer discharges ions across a wide area and eliminates static charges from all types of surfaces.

Gun; Ionizing Blow-Off with 120VAC Power Supply & 0.4m Inline Filter

Ionizing Bar with Installation Kit

Ionizer emits equal quantities of positive and negative ions to neutralize static charges within the work area, system requires no calibration or adjustments.

Static-Sensing Ionizer

The static-sensing ionizer installed on Fan Filter Unit using Installation Kit; uses downward air flow to extend ionizing range.

Ionizing Bar for Glove Boxes

Glove box configuration includes ionizing bar and power supply along with one fan per emitter pair mounted to ensure uniform ion distribution throughout.

Cleanroom Ionizing Blow-Off Gun

This cleanroom Ionizing Blow-off Gun neutralizes static surface charges to protect sensitive parts from electrostatic discharge (ESD); a controlled burst of clean air or nitrogen then removes particles.

Ionizing Blow-Off Gun with Power Supply

This ionizing blow-off gun is used for quickly and safely neutralizing static charges. 0.4-micron in-line filter ensures purity of gas feed.

Ion Bar Kit for Glovebox; 11"

Ion bar kit safely neutralizes charges to protect against electro-static charges. Attaches to inside ceiling of glovebox. Ion bar sold separately.

Ion Bar, 11", 2 Emitters, Uninstalled, 120 V

Safely neutralizes surface charges to protect against electro-static discharge (ESD)

Ion Bar Kit for Glovebox

Ion bar kit controls particles and eliminates static charges that attract and hold particles. Attaches to inside ceiling of glovebox. Ion bar sold separately.

Ion Bar Kit for Glovebox; 11"

Ion bar kit safely neutralizes charges to protect against electro-static charges. Attaches to inside ceiling of glovebox. Ion bar sold separately.

Softwall Modular Cleanroom with Ionizing Bar

Ionizing bar, shown mounted on modular softwall cleanroom Fan/Filter Unit (FFU), neutralizes surface charges to prevent ESD and particle attraction

Convenient Hanging Bracket

Easily store unit up and away from work surface to avoid potential contamination

Static-Neutralizing Ionizing Bar

Airflow from the blower distributes positive and negative ions onto the surfaces below, neutralizing static charges that can lead to electro-static discharge and attract particles.

Ionizing Bar

For use on 24" x 48" ( 610 x 1219 mm) filter/fan units only (Order FFUs separately).